We believe that our goals have been achieved, and that you will be pleased with your purchase.

We provide a 30 day, money back, satisfaction guarantee on the products we sell."If you are dis-satisfied with your purchase, within 30 days, simply call us at 303-215-3322, get a return material authorization number, send it back in re-salable condition, and we will refund your money, less shipping & handling Purchaser waives the right to any refund under this guarantee, or the warranty below, by breaking any seal on any product or the seal on any "container filled with consumables"

For a period of one (1) year, from the date of purchase, all products we sell (excluding batteries and other consumables) are warranted to perform the function for which they are intended. This does not include Misuse or Abuse…they are not indestructible. If any product fails to perform satisfactorily within this period, in residential use, contact us @  970-545-2360, get a return material authorization number, send it back to us, and we will, at our sole option, repair or replace the item at no charge to you, except for return postage. In the event that, for any reason, we are unable to repair or replace the item, we may refund your purchase price to fulfill this obligation. Our maximum liability under this warranty is equal to the purchase price of the warranted item. We make no other warranty, expressed or implied, and expressly deny any responsibility for consequential liability of every sort, whatsoever.")

PARTS LIST: (Parts shown on FIGURE 1)

1. Unwrap the "24vdc POWER SUPPLY" and the "PRIMARY AIR TUBE". Carefully stretch them out to full length. You will note that they are tied together with "zip ties" to prevent tangling, and to prevent the "FLEXIBLE AIR TUBE" from becoming detached inside the "SYSTEMS BOX".
2. Straighten the silver electrodes by rolling them between a book and a countertop, (or between your hand and a flat surface). Make certain the electrodes are clean & shiny, polish them with the scrubber pad if necessary. Insert the flattened end of each into one of the "electrode Jacks" on the bottom of the powerhead.
3. Place the "RIGID AIR TUBE" (attached to the open end of the "FLEXIBLE AIR TUBE") through the upper and lower rigid air tube openings, so that the open end will extend into the quart jar during operation. (see figure 2)
4. set the "TIMER" for three(3) hours (see the timer manufacturer’s instructions)
5. Plug the "110vac POWER CORD" (which comes out of the "SYSTEMS BOX") into the timer.

• The SYSTEMS BOX part of your Ultra Small Particle CS Generator is powered by 110vac. Please utilize all normal precautions for working with household current while using this product. Improper use may cause shock hazards, including the possibility of death.

• The SYSTEMS BOX must be kept away from sources of water such as sinks, bathtubs, etc.
• The SYSTEMS BOX must be operated by an adult.
• The SYSTEMS BOX contains an aquarium type "air pump", and the manufacturer of that pump requires it to be placed ABOVE the level of water in any container into which air is being pumped. (Under some circumstances, siphonage might occur (if the pump is located below the level of water in a container into which air is being pumped), causing an "electrical shock hazard"
• In the event The SYSTEMS BOX malfunctions or becomes immersed in water, unplug it immediately. Never touch a wet 110vac appliance.
• NEVER use this unit around spilled water.
• Never touch any 110vac appliance if your hands or feet are wet.
• Never use salt as a component of USP

1. Obtain a clean "quart" jar.

This generator is constructed according to principles set forth in published engineering reports.

Our design, utilizing these published principles is unique in a number of ways, including (but not limited to) the incorporation of the following user friendly features:

1. Long supply leads, allowing for easy placement of the SYSTEMS BOX in relation to the power supply and CS being generated
2. Separate SYSTEMS BOX and POWER HEAD, for a safe, user friendly system. (voltage, at the electrode, is less than 7 vdc )
3. Electrode jack connectors in the POWER HEAD, providing consistent reliable electrode spacing.
4. Durable, dependable solid state circuitry provides accurate and consistent process power
5. A simple, reliable and replaceable timer, for consistent dependable results.

The CS generated by this generator contains particles too small to be detected with a lazer pointer, though their presence can be detected electrically, through a change in the conductivity of the water. (And, if you are the sort to put things in your mouth, they can be tasted.)

The particles are charged, and because they are very small, they loose their charge fairly rapidly. They are also very susceptible to light and electromagnetic fields.

When the particles loose their charge, they agglomerate (stick together) forming larger particles.

The implication is that ULTRA FINE PARTICLE CS should be used, to accomplish whatever specific purpose you have in mind, while it is still fairly "fresh". USP CS can be stored for a month or more at room temperatures in total darkness. HOWEVER, we feel FRESH IS BEST for most purposes..

CS, of any sort, should be stored in a room-temperature, dark location (kept out of direct sunlight or fluorescent light).

CS in storage, should always be kept away from electrical fields, kept out of refrigerators and stored in glass (plastic tends to be somewhat conductive causing the silver particles to loose their charge and get unacceptably large).

Some authorities on the subject of colloids have suggested that particles of the size created by this generator, (silver ions really), do not actually form a colloidal suspension, but are more similar to a silver solution. Based on the electrical changes we have observed in the liquid, this makes some sense, though I do not possess the formal credentials to express a "qualified opinion".

We are manufacturers and mail-order retailers of Colloidal Silver Generators.

As such, we are unable to provide information regarding uses of Colloidal Silver.

Our products are not intended for diagnostic or treatment purposes.

The following page contains a list of written resources, or resource material vendors.

Please contact the listed sources directly for more information.

NOTHING IN THIS DOCUMENT HAS BEEN REVIEWED OR APPROVED BY THE FDA.

You can purchase additional strands of 14 gauge ultra-pure .9999 fine silver rod direct from the distribution company at the address below. The price is $18 for each 12 inch strand of silver rod (1 pair of electrodes). For a limited time only, you can purchase silver rod in bulk at a significant discount: five feet of .9999 pure silver rod for only $79(that’s only $15.80 per foot), or ten feet of .9999 pure silver rod for only $139 (that’s only $13.90 per foot)! Order online using your Visa , Mastercard, and American Express or Just send your check or money order to: