Even though this generator model is brand new…we never made one like it before..&..we’ve never seen one like it anywhere else…the technology and electronics are tested and reliable.

"We provide a 30 day, money back, satisfaction guarantee on the products we sell."If you are dis-satisfied with your purchase, within 30 days, simply call us at 970-545-2360, get a return material authorization number, send it back in re-salable condition, and we will refund your money, less shipping & handling Purchaser waives the right to any refund under this guarantee, or the warranty below, by breaking any seal on any product or the seal on any "container filled with consumables"

For a period of one (1) year, from the date of purchase, all products we sell (excluding batteries and other consumables) are warranted to perform the function for which they are intended. This does not include Misuse or Abuse…they are not indestructible. If any product fails to perform satisfactorily within this period, in residential use, contact us @ 970-545-2360, get a return material authorization number, send it back to us, and we will, at our sole option, repair or replace the item at no charge to you, except for return postage. In the event that, for any reason, we are unable to repair or replace the item, we may refund your purchase price to fulfill this obligation. Our maximum liability under this warranty is equal to the purchase price of the warranted item. We make no other warranty, expressed or implied, and expressly deny any responsibility for consequential liability of every sort, whatsoever.")

• Iatrogenic Infection (hospital acquired) [Steve Barwick, CA] After gall stone removal surgery in mid-December 2001, and follow up surgery a week later to remove gallstones lodged in the common bile duct (overlooked by the surgeon), Steve ended up with an extremely serious iatrogenic (i.e., hospital-acquired) infection in his intestinal tract. The result of this infection was an acute case of diarrhea that had the intensity of dysentery. Three courses of anti-biotics (including cipro), one course of Olive Leaf, one course of Grapefruit Seed extract and copious amounts of conventional CS later, Steve was 35 lbs lighter and beginning to fear death. In early April Steve got word that the USP Colloidal Silver Generator was ready for testing. He began making the ultra-small particle size colloidal silver in quart-sized batches, and taking four ounce doses, three times daily (12oz in three 4oz doses). By the second day the diarrhea was largely abated, and the stomach cramps nearly gone. Within four days the level of infection appeared to have abated. In under a week his appetite returned to normal and he was able to eat his first full meal without pain in over four and a half months! Although his symptoms had subsided, Steve continued the treatment for 22 days, just to be sure. The infection reportedly has not returned..

1. Timer
   • 110vac appliance timer
2. Systems box with:
   • 110vac input POWER CORD
   • LOW VOLTAGE POWER SUPPLY, WRAPPED AROUND FLEXIBLE AIR TUBING
   • RIGID AIR TUBING CONNECTED TO FLEXIBLE AIR TUBING
   • TIMING/INSTRUCTION CHART FOR MAKING CONVENTIONAL CS ON ONE SIDE
   • INSTRUCTION/REMINDER FOR MAKING USP CS ON THE OTHER SIDE
   1. Power Head with:
      • RIGID AIR TUBING OPENINGS (UPPER AND LOWER)
      • two (2) ELECTRODE JACKS
      • RED "LED" process indicator (light) for conventional CS operations
      • GREEN "LED" process indicator (light) for USP CS operations
      • TWO POSITION SWITCH, with color coded label, for setting USP or conventional operations
   2. .9999 FINE SILVER ELECTRODES (2) [slightly flattened on one end]
   3. SCRUBBER PAD (1) for cleaning/shining silver electrodes
   4. Instruction Set. (not shown)

   Everything necessary to make "Ultra Small Particle CS´, or conventional CS is included, EXCEPT ;

   DISTILLED WATER and one(1) (GLASS)QUART JAR (wrapped to achieve complete opacity)

   NOTE:

   We did not include any sea salt, or salt solution container…this can be used to make conventional CS, but it is not necessary.

   Salt impairs the formation of "ions" when USP CS is being generated, so it should NEVER BE USED when generating USP CS.

   ASSEMBLY

   1. Unwrap the "24vdc POWER SUPPLY" and the "PRIMARY AIR TUBE". Carefully stretch them out to full length. You will note that they are tied together with "zip ties" to prevent tangling, and to prevent the "FLEXIBLE AIR TUBE" from becoming detached inside the "SYSTEMS BOX".
   2. Straighten the silver electrodes by rolling them between a book and a countertop, (or between your hand and a flat surface). Make certain the electrodes are clean & shiny, polish them with the scrubber pad if necessary. Insert the flattened end of each into one of the "electrode Jacks" on the bottom of the powerhead.
   3. Place the "RIGID AIR TUBE" (attached to the open end of the "FLEXIBLE AIR TUBE") through the upper and lower rigid air tube openings, so that the open end will extend into the quart jar during operation. (see figure 2)
   4. Set the "TIMER" for three(3) hours (or other appropriate time period if you are making conventional cs)(see the timer manufacturer’s instructions and the chart on the side of the systems box).
   5. Plug the "110vac POWER CORD" (which comes out of the "SYSTEMS BOX") into the timer.

   EQUIPMENT USAGE

   PRECAUTIONS

   • The SYSTEMS BOX part of your USP II CS Generator is powered by 110vac. Please utilize all normal precautions for working with household current while using this product. Improper use may cause shock hazards, including the possibility of death.
   • The SYSTEMS BOX must be kept away from sources of water such as sinks, bathtubs, etc.
   • The SYSTEMS BOX must be operated by an adult.
   • The SYSTEMS BOX contains an aquarium type "air pump", and the manufacturer of that pump requires it to be placed ABOVE the level of water in any container into which air is being pumped. (Under some circumstances, siphonage might occur (if the pump is located below the level of water in a container into which air is being pumped), causing an "electrical shock hazard"
   • In the event The SYSTEMS BOX malfunctions or becomes immersed in water, unplug it immediately. Never touch a wet 110vac appliance.
   • NEVER use this unit around spilled water.
   • Never touch any 110vac appliance if your hands or feet are wet.
   • Never use salt as a component of USP CS

   INSTRUCTION SET…ALL TYPES OF CS

   1. Obtain a clean "quart" jar.
   • Make the outside of the jar totally opaque by wrapping it in "duct tape, or electrical tape, or covering it with black craft paper.
   • Be sure that when you are finished, the jar is stable when it sits on a table or countertop.
   1. Fill the jar to within one (1) inch of the top with distilled water . (DISTILLED WATER IS A MUST, FOR ALL TYPES OF CS) All tests and calibrations have been done with "room temperature" water, (72 deg.F), so that is what we recommend. Home distillers are problematic, as the quality of water they produce varies greatly. The quality of the cs you produce depends heavily on the quality of water you use. We cannot recommend the use of "home distilled" or "purified" water in the production of cs. This is especially true for USP cs.
   2. Place the "SYSTEMS BOX " within easy reach of the jar, and ABOVE the water level in the jar.
   3. Place the POWER HEAD ( assembled, with electrodes and rigid air tubing in place) on top of the jar, with the electrodes and air tubing extending into the water.
   4. Plug the TIMER into a suitable power source (the SYSTEMS BOX should already be plugged into the timer). The timer will plug directly into the wall outlet.

   USP CS SPECIFIC INSTRUCTIONS

   1. Follow instructions 1 through 5 above
   2. Be sure the timer is set for three (3) hours. (For ultra fine particle size, 3hrs is the OPTIMUM time the generator can be run) Running this generator longer than 3.5 hrs. will make a CS suspension with particle sizes LARGER than the design size, which defeats the purpose of this generator..
   3. Start the timer.
   4. When the timer shuts off, make use of your "ultra fine particle CS".
   5. "ultra fine particle CS" is always clear if it is properly made. If the solution you have made is not clear, there is a problem (probably with the water you are using). We suggest that if yours is not clear, you should go buy some distilled water and start over.

   CONVENTIONAL CS SPECIFIC INSTRUCTIONS

   1. Follow general instructions 1 through 5 on the previous page
   2. Consult the timing chart on the side of the systems box for the appropriate strength
   3. Set the timer for the ppm you require.
   4. When the timer shuts off, use your fresh CS.

   For "unstirred CS"…just like we all used to make, simply pull the bubbler tube out of the power head and allow the air to blow out on the counter…THE PUMP IS DESIGNED FOR A LIFETIME OF USE…THIS WILL NOT DAMAGE YOUR PUMP IN ANY WAY.

   Notes on the "low voltage" USP II COLLOIDAL SILVER GENERATOR

   This generator is constructed according to principles set forth in published engineering reports.

   Our design, utilizing these published principles is unique in a number of ways, including (but not limited to) the incorporation of the following user friendly features:

   1. Long supply leads, allowing for easy placement of the SYSTEMS BOX in relation to the power supply and CS being generated
   2. Separate SYSTEMS BOX and POWER HEAD, for a safe, user friendly system. (voltage, at the electrode, is less than 7 vdc )
   3. Electrode jack connectors in the POWER HEAD, providing consistent reliable electrode spacing.
   4. Durable, dependable solid state circuitry provides accurate and consistent process power
   5. A simple, reliable and replaceable timer, for consistent dependable results.

   The conventional colloidal silver generated by this device contains both particles & ions. Particles and ions will be fairly evenly dispersed throughout the suspension due to the stirring action. Particle size will vary through a fairly broad range, from roughly .25 nanometer to roughly 7000 nanometers. The largest number of particles will be in the middle of this range. 1 micrometer equals 1000 nanometers.

   This generator can, consistently generate colloidal suspensions with silver weight up to about 40 ppm, which appears to be the approximate practical maximum concentration for elector-colloidal silver.

   PPM is a proportion by weight.

   When ppm begins to rise above 40 ppm, depending on water temperature and other variables, silver "nuggets" will begin to appear in the suspension due to agglomeration.

   For suspensions with a concentration above 40ppm, (electro-colloidal silver, anyway) additives are required.

   The most common form of additive is gelatin, which can be used to create "mild silver protein".

   The protein keeps the silver from agglomerating, but the protein keeps the silver from touching bacteria that may contaminate the silver suspension.

   Some mild silver protein products have demonstrated fungal growth and other forms of dangerous contamination on the protein surrounding the silver particles.

   WE STRONGLY RECOMMEND AGAINST MAKING MILD SILVER PROTIEN

   The USP CS generated by this generator contains particles too small to be detected with a lazer pointer, though their presence can be detected electrically, through a change in the conductivity of the water. (And, if you are the sort to put things in your mouth, they can be tasted.)

   The "ppm" of the cs generated when making USP cs will be approximately 3ppm. Bear in mind, ppm is a proportion by weight, and has nothing to do with the number of discrete particles..

   "ultra fine particle CS" is always clear if it is properly made. If the solution you have made is not clear, there is a problem (probably with the water you are using). We suggest that if yours is not clear, you should go buy some distilled water and start over.

   The particles are charged, and because they are very small, they loose their charge fairly rapidly. They are also very susceptible to light and electromagnetic fields.

   When the particles loose their charge, they agglomerate (stick together) forming larger particles.

   The implication is that ULTRA FINE PARTICLE CS should be used, to accomplish whatever specific purpose you have in mind, while it is still fairly "fresh". USP CS can be stored for a month or more at room temperatures in total darkness. HOWEVER, we feel FRESH IS BEST for most purposes..

   CS, of any sort, should be stored in a room-temperature, dark location (kept out of direct sunlight or fluorescent light).

   CS in storage, should always be kept away from electrical fields, kept out of refrigerators and stored in glass (plastic tends to be somewhat conductive causing the silver particles to loose their charge and get unacceptably large).

   Some authorities on the subject of colloids have suggested that particles of the size created by this generator, (silver ions really), do not actually form a colloidal suspension, but are more similar to a silver solution. Based on the electrical changes we have observed in the liquid, this makes some sense, though I do not possess the formal credentials to express a "qualified opinion".

   We are manufacturers and mail-order retailers of Colloidal Silver Generators.

   As such, we are unable to provide information regarding uses of Colloidal Silver.

   Our products are not intended for diagnostic or treatment purposes.

   NOTHING IN THIS DOCUMENT HAS BEEN REVIEWED OR APPROVED BY THE FDA OR ANY OTHER GOVERNMENT AGENCY